Cordesville, SC Duct Services: 3 Top Sealing Methods

*Estimated Read Time: 9 minutes* Leaky ducts waste energy, strain your HVAC, and pull musty crawl space air into your home. If you are researching duct sealing methods, this guide breaks down the top three ways to seal ductwork, when each method shines, and how to avoid common DIY pitfalls. You will learn how pros in Charleston evaluate leaks, price the work with no surprises, and tie sealing into air quality upgrades for a cleaner, more efficient home. ## Why Sealing Your Ductwork Matters Duct leaks are not minor. The U.S. Department of Energy estimates typical homes lose 20 to 30 percent of conditioned air through duct leaks. That lost air was paid for, but never reached your rooms. In the Lowcountry, that also means extra humidity sneaking in through gaps, which worsens comfort and mold risk. Beyond efficiency, leaky return ducts can pull dusty or musty air from attics and crawl spaces. Supply leaks can reduce airflow to key rooms, creating hot and cold spots. Sealing restores designed airflow, reduces runtime, and supports better air quality. What to watch for: 1. Rooms that are always too hot or cold 2. Excess dust, musty odors, or allergy flare-ups 3. High summer humidity even when the AC runs 4. Long HVAC cycles or rising utility bills > “Gavin repaired my broken under house duct very fast. Also, explained other issues he observed with my duct system.” ## The 3 Best Duct Sealing Methods Explained Every home is different. Pros choose a method based on duct material, leak location, system access, and code. Below are the three most reliable duct sealing methods, how they work, and where they fit. ### Method 1: Mastic Sealant (UL 181A-M/181B-M) Mastic is a thick, paint-on sealant engineered for ductwork. When applied to seams, joints, and small openings, it bonds to metal, fiberglass duct board, and many flex duct collars. Once cured, it stays slightly flexible, which is helpful as ducts expand and contract. Best uses: 1. Sealing metal trunk seams and fittings 2. Flex duct collar connections to takeoffs and plenums 3. Patching small gaps and irregular shapes where tape will not hold How pros apply it: 1. Clean the surface. Oil, dust, and insulation fibers reduce adhesion. 2. Mechanically fasten first. Screws or drawbands secure the joint. Sealing comes after fastening. 3. Brush on a 1/16 to 1/8 inch layer. For larger gaps, embed fiberglass mesh and add a second coat. 4. Verify cure time, then reinsulate as needed. Advantages: - Durable, long-lasting seal on irregular joints - Handles heat and humidity swings well - Cost effective and widely available Limitations: - Messy if overapplied - Not a replacement for missing mechanical fasteners - Not ideal for very large holes or torn duct sections > “Dustin was very professional, took the time to answer our questions and explain the issue. He spent 2 hours checking and cleaning all the units.” ### Method 2: Foil HVAC Tape (UL 181B-FX) Quality foil HVAC tape with an acrylic adhesive can be excellent when used properly. Look for the UL 181 listing printed on the tape. This is not the same as generic cloth or plastic “duct tape,” which fails quickly on ducts. Best uses: 1. Clean, straight seams on metal ducts 2. Patching small linear cracks or pinholes after preparation 3. Supplementing mastic for a belt-and-suspenders seal How pros apply it: 1. Clean and dry the surface. Remove old failing tape and adhesive. 2. Apply firm pressure across the full tape width to activate the adhesive. 3. Use a squeegee or roller to eliminate bubbles and ensure full contact. 4. Seal tape ends with a dab of mastic for insurance. Advantages: - Fast, neat, and effective on smooth seams - Great for service access panels when future removal is needed Limitations: - Fails early on dirty or rough surfaces - Does not span large gaps well - Loses grip on flex ducts or porous insulation facings > “James came by today and pointed out issues from the original duct work. He thoroughly took me through every issue and his recommendations.” ### Method 3: Aerosolized Duct Sealing (Internal Seal) Aerosolized duct sealing uses a computer-controlled blower to pressurize your ducts and inject a fog of sealant particles. These particles stick at leak edges and build a seal from the inside. The process can seal many hidden leaks behind walls, ceilings, and tight crawl spaces that are impossible to reach by hand. Best uses: 1. Extensive hidden leaks in finished homes where access is limited 2. Older duct systems with many small gaps across the network 3. Commercial or multi-zone systems where downtime must be minimized What to expect: 1. Technicians block off registers and hook equipment to the system. 2. A pre-test measures your leakage in CFM to set a baseline. 3. The sealant is injected while the computer tracks real-time leakage reduction. 4. A post-test and printed report show before and after results. Advantages: - Can reduce total leakage by up to 90 percent depending on system condition - Reaches inaccessible joints throughout the network - Generates measurable proof of improvement Limitations: - Higher upfront cost than mastic and tape - Not a fix for collapsed ducts or major structural damage - Requires trained technicians and specialized equipment > “We had our heat pump ductwork replaced. The process could not have been more smooth and everyone was so nice and informative.” ## DIY vs. Professional Duct Sealing in Charleston Some homeowners can successfully seal a few visible leaks at the air handler or accessible trunk lines. If you choose to DIY, follow code-backed basics: 1. Use UL 181 rated mastic or foil tape. Avoid cloth “duct tape.” 2. Mechanically fasten flex duct to collars with a drawband before sealing. 3. Seal, then reinsulate to maintain R-value and reduce condensation risk. When to call a pro: 1. You suspect return leaks pulling crawl space or attic air 2. Multiple rooms have poor airflow or comfort problems 3. Ducts are in a tight crawl space, or you see signs of moisture 4. You want a leakage test, report, and warranty on results Pros bring diagnostic testing, code knowledge, and the right materials. Our technicians use state-of-the-art equipment to find and fix leaks, then verify the improvement. That combination saves time and prevents do-overs. ## How We Seal Ducts at Fix-it 24/7 Our licensed HVAC technicians start with a visual inspection and, when indicated, a duct leakage test. We photograph problem areas, explain your options, and provide transparent, flat-rate pricing before work begins. Typical steps: 1. Secure loose connections with screws or drawbands 2. Clean and prep seams for adhesion 3. Choose mastic, UL 181 foil tape, or aerosol seal based on access and leak profile 4. Seal to standard, reinsulate where needed to prevent condensation 5. Verify airflow and leakage reduction, then present results Because Charleston homes often have vented crawl spaces, we also check for moisture and insulation concerns that impact ducts. If needed, we can integrate air filtration, purification, humidity control, or dehumidifiers to protect your improved duct system. Local detail you can trust: - Many Lowcountry homes have long duct runs with multiple takeoffs over vented crawl spaces. That design is leak-prone and humidity sensitive. - Summer dew points routinely hit the mid-70s. Unsealed return leaks can drag that sticky air indoors, overloading your AC and spiking energy use. ## Codes, Standards, and Hard Facts You Should Know - DOE research indicates 20 to 30 percent of air in typical duct systems is lost to leaks. Reducing leakage improves comfort and can cut HVAC runtime. - Use code-compliant materials. UL 181A-M or 181B-M mastic and UL 181B-FX foil tape are the accepted standards for residential ducts. - EPA notes indoor air can be 2 to 5 times more polluted than outdoor air. Sealing helps control what your system pulls in, especially on the return side. These facts guide our recommendations and help you compare bids apples-to-apples. ## Signs You Need Duct Sealing Now 1. Whistling sounds near seams or takeoffs when the fan runs 2. Dust streaks on insulation that trace an air path at joints 3. Comfort complaints in rooms far from the air handler 4. High humidity or musty odors, especially after rain 5. Utility bills that feel out of line with your neighbors Quick homeowner checks: 1. With the fan on, hold a stick of incense near suspect joints and watch for smoke pull or push 2. Inspect flex-to-collar connections for slack or gaps 3. Look for kinks, crushed duct sections, or torn insulation jackets If you find problems, schedule a professional inspection. We can confirm leaks, identify hidden issues, and recommend the right repair. ## Cost, ROI, and When Each Method Makes Sense Pricing depends on access, duct length, material, and how many joints need work. A few examples to help frame decisions: 1. Mastic and Foil Tape: Ideal for targeted repairs or sealing accessible trunks and takeoffs. Lowest upfront cost and strong durability when prepped correctly. 2. Aerosolized Sealing: Best when testing shows widespread leakage or when ducts are inaccessible. Higher upfront, but the measured leakage reduction can deliver faster payback. 3. Replace vs. Seal: If ducts are crushed, improperly sized, or water-damaged, replacement or redesign may be smarter. Sealing cannot fix structural problems. Where the returns show up: - Lower energy bills as conditioned air actually reaches your rooms - Better dehumidification and comfort in Charleston’s long cooling season - Cleaner indoor air and reduced dust - Less wear on your HVAC blower and compressor We provide clear options, from surgical sealing to whole-system solutions, with financing available for larger projects. ## Sealing + IAQ Upgrades: A Powerful Combo Sealing is step one. Controlling what enters the system is step two. We commonly pair duct sealing with: 1. High-MERV Filtration: Right-sized filters improve capture without choking airflow 2. Air Purification: UV or active purification to reduce microbes at the coil and in ducts 3. Humidity Control: Whole-home dehumidifiers keep RH in the ideal 45 to 55 percent range 4. Crawl Space Services: Cleaning and addressing moisture sources that feed odors and spores This combined approach delivers cleaner, drier air, protects your coil, and extends equipment life. ## Maintenance: Keep Seals Tight and Airflow Strong Seals last longer when the system is maintained. Our Green Club membership provides annual tune-ups and preventative care, including a deep-clean approach that goes beyond a basic check. Members receive priority scheduling and discounts on repairs. Regular filter changes, coil cleaning, and blower checks reduce static pressure that can stress duct connections. Homeowner maintenance tips: 1. Change filters on schedule, especially during pollen season 2. Keep supply and return grilles clear of furniture and rugs 3. Schedule a duct check if you renovate, add rooms, or notice comfort changes ## Choosing the Right Partner in the Lowcountry - Experience with crawl spaces and high humidity matters - Insist on UL 181 compliant materials and before-and-after verification - Transparent, flat-rate pricing prevents surprises - 24/7 availability is useful when comfort cannot wait Fix-it 24/7 has served Charleston, Mount Pleasant, Summerville, Goose Creek, and beyond since 2001 with licensed, background-checked technicians and advanced diagnostic tools. We are A+ BBB accredited and stand behind our work with a 100% satisfaction guarantee. ## Frequently Asked Questions ### How do I know which duct sealing method is best for my home? We recommend an inspection and, if needed, a leakage test. Accessible seams respond well to mastic and UL 181 foil tape. Widespread hidden leaks often justify aerosolized sealing with measurable results. ### Is aerosolized duct sealing safe for my family and pets? Yes. The sealant is applied inside the sealed duct system. Technicians monitor particles and ventilation during the process, and you receive a report with before and after data. ### Will duct sealing reduce my energy bills in Charleston? In most cases, yes. DOE data shows typical homes lose 20 to 30 percent of air to leaks. Sealing helps that air reach rooms, which reduces runtime and costs. ### Can I just use regular duct tape to seal my ducts? No. Generic cloth or plastic “duct tape” fails on ducts. Use UL 181 rated mastic or UL 181 foil HVAC tape applied to clean, prepared surfaces for a durable seal. ### How long does duct sealing take? Small repairs can be completed in a few hours. Whole-home sealing or aerosolized sealing typically finishes in the same day, depending on access and system size. ## In Summary Sealing ductwork restores airflow, protects indoor air, and reduces energy waste. The three proven duct sealing methods are mastic, UL 181 foil tape, and aerosolized sealing. For Charleston homes, sealing plus humidity control is a smart combo. Ready for an expert assessment of duct sealing methods in Charleston? Call Fix-it 24/7 at (843) 212-7515 or schedule at https://fixmyhome247.com/ today. ## Talk to a Duct Sealing Specialist Call (843) 212-7515 or book online at https://fixmyhome247.com/. Ask about Green Club membership for annual tune-ups, priority service, and member discounts. We serve Charleston, North Charleston, Mount Pleasant, Summerville, Goose Creek, and nearby communities. ### About Fix-it 24/7 Air Conditioning, Plumbing & Heating, LLC Proudly serving the Charleston area since 2001, Fix-it 24/7 delivers licensed, certified HVAC care with true 24/7 availability, flat-rate pricing, and a 100% satisfaction guarantee. We are A+ BBB accredited and known for deep-clean tune-ups, precise diagnostics, and clean, code-compliant workmanship. Our Green Club membership adds annual tune-ups, discounts, and priority service. From duct sealing to IAQ upgrades, we optimize comfort and efficiency for Lowcountry homes and businesses.

Duct Health: When to Call in the North Charleston Experts

*Estimated Read Time: 3 minutes* Maintaining the health of your ductwork is crucial not only for the efficiency of your HVAC system but also for the quality of the air circulating in your home. For homeowners in North Charleston, understanding when to seek professional help for duct issues can save both time and money. The expertise offered by Fix-it 24/7 Air Conditioning, Plumbing & Heating, LLC ensures that your duct system performs optimally, contributing to comfort and energy savings. ## Understanding Duct Health Ductwork is a critical component of your home's HVAC system, responsible for distributing air throughout your living space. Regular maintenance is essential as it prevents a range of issues from developing. Over time, dust, debris, and even small pests can accumulate in your ductwork. This buildup can lead to inefficient system performance, poor air quality, and increased allergy symptoms. ### When to Consider Professional Help Recognizing when your duct system requires expert attention is vital. Here are a few signs that it might be time to call in the professionals: 1. **Unusual Odors**: If you notice a persistent musty smell, it could indicate mold growth inside your ducts. Professional cleaning can eliminate mold and prevent health risks. 2. **Increased Allergies**: A spike in allergy symptoms among household members might suggest that your ducts are circulating allergens throughout your home. 3. **Higher Energy Bills**: Inefficient ductwork can make your HVAC system work harder, leading to higher energy costs. 4. **Visible Dust and Debris**: If you see a noticeable buildup of dust around your vents, it might mean your ducts are overdue for a cleaning. One homeowner, Karen M., shared her experience with having her ductwork serviced by Fix-it 24/7: "The process could not have been more smooth, and everyone was so nice and informative! I highly recommend Fix-it 24/7"[2]. ## The Fix-it 24/7 Advantage Choosing the right professionals for duct maintenance can make all the difference. Fix-it 24/7 Air Conditioning, Plumbing & Heating, LLC brings a blend of expertise, reliability, and customer service that highlights their commitment to delivering exceptional results. ### Comprehensive Services At Fix-it 24/7, the team offers a comprehensive range of services that address both routine maintenance and complex repairs. Whether it's regular cleaning or replacing worn-out ductwork, their technicians ensure meticulous attention to every detail. As Scott B. noted in his review, "They replaced the ductwork in our crawl space and did a great job"[0]. ### Customer-Centric Approach The company's focus on customer satisfaction is evident through their personalized service and transparent communication. Charles W. appreciated this approach: "Gavin repaired my broken under-house duct very fast and explained other issues he observed with my duct system"[3]. ### Why Duct Health Matters Investing in duct maintenance provides numerous benefits: - **Energy Efficiency**: Clean and well-maintained ducts improve airflow, reducing the load on your HVAC system and lowering energy consumption. - **Enhanced Air Quality**: Removing contaminants from your ductwork increases the quality of the air you and your family breathe. - **System Longevity**: Regular maintenance reduces the risk of major breakdowns and extends the life of your HVAC system. ### Testimonials Speak Volumes The testimonies of satisfied customers are a testament to the quality of service provided by Fix-it 24/7. Stephen F. offers high praise: "I'm offering up my highest recommendation to this company. The new ductwork looks great"[1]. Enhance your home's comfort and efficiency by ensuring that your ductwork is in top condition. If you notice any signs of trouble or simply want to improve your air quality, don't hesitate to reach out to Fix-it 24/7. Visit their website at [fixmyhome247.com](https://fixmyhome247.com/) or call **(843) 305-8086** to schedule your service today.

Moncks Corner HVAC Duct Services: Replacement Costs

*Estimated Read Time: 9 minutes* If you are pricing an air duct replacement cost, you want a clear, local answer. In the Lowcountry, crawl spaces, humidity, and salt air can be rough on ductwork. This guide explains typical pricing, what drives the numbers, and how to avoid surprise add-ons. You will see how materials, labor, layout, and code updates affect the final bill. We also share tips to save money without cutting corners. ## What Counts As “Duct Replacement” and When You Need It Air duct replacement means removing failing supply and return ducts and installing new duct runs, transitions, and connections. It can include new plenums, boots, takeoffs, hangers, insulation, dampers, and mastic sealing. In crawl-space homes around Charleston, this often includes replacing crushed flex runs and leaky trunk lines. You likely need replacement when you see or experience: 1. Visible damage - Torn or crushed flex duct - Missing or moldy insulation - Rusted or disconnected metal sections 2. Performance issues - Hot and cold spots - Weak airflow at distant rooms - Excess dust despite filter changes 3. Air quality concerns - Musty odors from the crawl space - Condensation on ducts causing wood rot risk 4. Testing data - High static pressure or failed duct leakage test A licensed HVAC pro should inspect before quoting. Fix-it 24/7 uses state-of-the-art diagnostic techniques to confirm what must be replaced and what can be repaired. ## Typical Air Duct Replacement Cost Ranges in Charleston Budgets vary by home size, access, and material. Here are realistic ballparks we see in the Charleston area for a full or partial replacement on a single-family home: - Partial replacement of problem runs: $1,200 to $3,000 - Full crawl-space duct system, flex plus metal transitions: $4,500 to $9,500 - Full system with new supply and return trunks, plenums, balancing, and code updates: $7,500 to $14,000 - Large homes or tight attic retrofits with hard pipe: $12,000 to $20,000+ These are estimates, not quotes. Material quality, number of runs, permits, and IAQ upgrades will move you up or down. We provide flat-rate, line-item pricing so you see where each dollar goes. ## The Biggest Cost Drivers You Can Control Several factors reliably swing your final price. Focus on these during your estimate review: 1. Duct type and quality - Flex duct is common and cost-effective. - Rigid metal duct offers durability and smoother interiors but costs more. - Hybrid systems use metal trunks with flex branches, a smart middle ground. 2. Insulation level - Higher R-values reduce sweating and energy loss in humid crawl spaces. - R-8 on unconditioned runs is common for our climate. 3. Layout and sizing - Right-sized ducts reduce noise and improve comfort. - Redesign for long runs or new additions adds labor but can solve hot rooms. 4. Access and difficulty - Tight crawl spaces, low attics, and many obstacles increase labor time. 5. Sealing and testing - Professional mastic sealing and code-required leakage testing add cost but pay back in savings. 6. Add-ons and code updates - New boots, collars, and dampers are low-cost upgrades that deliver better balancing. - New returns, filtration cabinets, or UV air purification raise costs but improve IAQ. Pro tip: Ask your estimator to separate materials, labor, and testing. Transparency makes it easy to compare bids. ## What Your Estimate Should Include A complete, professional proposal protects you from scope creep and surprise fees. Your estimate should list: 1. Scope of work - Which ducts are replaced vs. reused - Demolition, disposal, and site protection steps 2. Materials - Duct type, size, insulation R-value - Sealing method, hangers, collars, boots 3. Design details - CFM targets per room - Static pressure goals and balancing plan 4. Testing and verification - Duct leakage testing target (for example, ≤ 10% of system airflow) - Post-install static pressure reading 5. Warranty and guarantees - Material and workmanship coverage - Follow-up check or tune-up At Fix-it 24/7 we use industry-leading diagnostic techniques, then provide flat-rate, line-item pricing so you know exactly what you are buying. ## Cost Examples: Crawl Space vs. Attic Homes Charleston has many crawl-space homes, plus newer builds with attic ductwork. The location drives effort and price. - Crawl space replacement - Common issues: crushed flex, standing water history, insulation sloughing, rodent damage. - Typical scope: new insulated flex on metal trunks, hanger upgrades, mastic sealing, and vapor-barrier friendly supports. - Typical range: $4,500 to $10,500 depending on runs and access. - Attic replacement - Common issues: overheated ducts, poor insulation, long runs to distant rooms. - Typical scope: upsized trunks, re-routing for shorter paths, higher R-value insulation, and radiant-heat strategies. - Typical range: $6,500 to $14,000 depending on layout and material choice. - Partial replacements - Replace damaged branches, add balancing dampers, and correct bad fittings. - Typical range: $1,200 to $3,000. ## Materials and Their Price Impact Your choice of materials affects both budget and performance. - Flex duct - Lowest material and labor cost. - Properly installed and supported, it performs well for branches. - Rigid galvanized steel - Best durability and smooth airflow. - Higher material and fabrication cost. - Fiberglass duct board - Good for plenums and trunks when sealed correctly. - Sensitive to moisture. Not ideal for damp crawl spaces. - Insulation - R-6 is baseline for many interiors. R-8 is common for crawl spaces and attics. - Sealing products - Mastic and mastic tape outperform cloth duct tape. Ask for a hybrid design with metal trunks and flex branches if you want a balance of performance and price. ## Labor, Permits, and Timeline Labor is the largest line item. A full replacement usually takes one to three days for a crew, depending on access and redesign. Permits and inspections may apply, especially when plenums or returns are modified. A proper install includes hangers, supports, and sealed penetrations. What to expect on project day: 1. Protection and prep - Floor and entry protection, equipment staging, and power safety. 2. Removal - Safe demo and disposal of old ducts and contaminated insulation. 3. Install - New trunks and branches sized to design, secure hangers, and sealed joints. 4. Test and balance - Static pressure checks and room-by-room airflow adjustments. 5. Clean up and walkthrough - Final review, thermostat check, and homeowner sign-off. ## Add-Ons That Are Worth It Some extras pay back in comfort and air quality. - Return air upgrades - Adding returns in closed-off rooms smooths airflow and reduces noise. - Filtration and IAQ - Media filters, UV lights, and air purification improve IAQ and reduce dust. - Dehumidification - Dedicated dehumidifiers protect your crawl space from condensation and mold. - Zoning and dampers - Balancing dampers are low cost. Motorized zoning is a premium but can solve temperature swings. The U.S. Department of Energy reports many homes lose 20 to 30 percent of the air that moves through the duct system due to leaks, holes, and poorly connected ducts. Investing in sealing and design fixes that loss. ## When Repair or Cleaning Beats Full Replacement You do not always need a full replacement. Consider these options first: - Duct sealing - Mastic sealing at joints and boots often fixes comfort issues fast. - Targeted repairs - Replace crushed or disconnected runs only. - Professional cleaning - Full residential air duct cleaning can restore airflow if ducts are sound. - Disinfecting and IAQ upgrades - When odor is the issue, disinfecting and purification can help without new ducts. Our team performs duct inspection and will tell you when a repair or cleaning is smarter than replacement. ## How To Compare Bids Like A Pro Price is important, but value wins in the long run. Use this checklist to compare apples to apples: 1. Same scope and material list across bids 2. Stated duct sizes, insulation R-values, and sealing methods 3. Evidence of load and airflow calculations, not guesswork 4. Leakage and static pressure targets in writing 5. Warranty terms in years for materials and labor 6. Crew credentials and supervision plan 7. Clear timeline, permit handling, and cleanup Fix-it 24/7 provides transparent, upfront pricing with itemized scopes. Our licensed, certified technicians follow proven methods for Charleston homes. ## Memberships, Financing, and Ways To Save Smart planning can trim hundreds from your project. - Green Club Membership - Annual tune-ups and preventative care are included. - Monthly membership option - $24.95 per month provides ongoing discounts on services. - Seasonal promos - Ask about current promotional pricing for first-time customers. - Bundle work - Pair duct replacement with needed HVAC or IAQ upgrades to save on labor trips. - Financing - Flexible financing and free estimates for system replacements and upgrades are available. Ask for a written scope with alternates. You can value-engineer materials or phasing without sacrificing performance. ## Compliance, Credentials, and Peace of Mind Ductwork affects safety, comfort, and energy bills. Choose a contractor that backs claims with proof. - Credentials you can verify - EPA and NATE certified technicians - Licensed and insured in South Carolina - Reputation and awards - A+ rated, BBB-accredited business - Top-rated performance on trusted platforms - Quality process - State-of-the-art equipment and industry-leading diagnostics - Post-install testing and documented results Since 2001, Fix-it 24/7 has delivered 24/7 emergency service and same-day availability when urgent duct failures cannot wait. ## Charleston-Specific Tips To Stretch Your Budget Local homes and climate shape the smartest choices. - Crawl spaces need thoughtful supports - Use rigid supports and proper sag spacing to prevent future kinks. - Fight humidity - Choose R-8 insulation on unconditioned runs and seal boots to subfloor to prevent sweating. - Salt air awareness - Stainless or coated fasteners resist corrosion near marsh areas. - Vent hygiene - Pair new ducts with exhaust fan cleaning to keep moisture moving out of bathrooms and kitchens. These small choices extend the life of your new duct system and protect your home. ## What Homeowners Are Saying > "They replaced the ductwork in our crawl space and did a great job." > –Scott B. > "Gavin repaired my broken under house duct very fast. Also, explained other issues he observed with my duct system. Ensured that I was aware of options that I could had to remedy my duct issues. He was very easy to work with and understand." > –Charles W. > "Fix-It replaced our entire duct and HVAC system and everyone was so professional and competent." > –Terri E. > "However, James came by today and literally pointing out 5 different issues from the original duct work to uninstalled wiring leftover from the building of the home. He thoroughly took me through every issue, his recommendations to fix each, and what to expect should I decide to not make updates." > –Greg C. ## Frequently Asked Questions ### How much does a full air duct replacement cost in Charleston? Most homes fall between $4,500 and $14,000 depending on size, access, and materials. Partial replacements can start near $1,200. Get an in-person inspection for accuracy. ### Is it cheaper to repair or seal instead of replacing ducts? Often yes. If ducts are structurally sound, targeted repairs and mastic sealing can restore comfort for far less than a full replacement. A pro inspection will confirm. ### How long does duct replacement take? Most projects take one to three days for a trained crew. Tight crawl spaces, redesigns, or material upgrades can add time. Your estimator should outline the schedule. ### Do new ducts improve air quality and comfort? Yes. Properly sized and sealed ducts reduce dust, balance room temperatures, and cut humidity issues. Upgraded filtration or purification can further improve IAQ. ### Should I choose flex or metal ductwork? Flex is cost-effective for branch runs when supported and sealed well. Metal trunks offer durability and smoother airflow. Many homes use a hybrid to balance cost and performance. ## Conclusion Replacing failing ducts can solve hot and cold spots, lower energy waste, and improve air quality. Use this guide to compare scopes, materials, and testing so you pay for results, not guesswork. For an accurate air duct replacement cost in the Charleston area, book an on-site evaluation today. ## Call or Schedule Now Call Fix-it 24/7 at (843) 212-7515 or schedule at https://fixmyhome247.com/. Ask about our Green Club Membership for ongoing savings. Get a flat-rate, itemized proposal and clear options the first time. ## Ready for a Transparent, Flat-Rate Quote? Call (843) 212-7515 or visit https://fixmyhome247.com/ to schedule your duct inspection and replacement estimate today. Same-day service is available for urgent issues in Charleston, Mount Pleasant, Summerville, North Charleston, and nearby neighborhoods. ## About Fix-it 24/7 Air Conditioning, Plumbing & Heating, LLC Fix-it 24/7 has served the Charleston area since 2001 with licensed, background-checked, EPA and NATE certified technicians. We offer 24/7 service, flat-rate pricing, and a 100% satisfaction guarantee. Our A+ BBB rating and award-winning service reflect our focus on quality. From duct cleaning and sealing to full duct replacement and IAQ upgrades, we do it right the first time.

Duct Services Pricing in Greater Charleston | Fix-it 24/7 Air Conditioning, Plumbing & Heating, LLC

Price intelligence

How our prices compare.

rate us fair value or better100%

What can you expect to pay?

Customer Perception

How customers feel about the bill, in their words.

Post-job survey · verified customers

SentimentFix-it 24/7 Air Conditioning, Plumbing & Heating, LLCMarket avgDelta

Reasonable Price100%50%+50 pts

Price Factors

Typical price ranges.

Price ranges for this service based on Fix-it 24/7 Air Conditioning, Plumbing & Heating, LLC job history.

Maintain

Our price$99 – $199

Repair

Our price$350 – $550

Typical$101 – $650

Replace/Install

Our price$800 – $1,200

Current Offers2 Active

Active coupons & redemption details.

View all offers

Duct Services

$1500 Duct Cleaning ($300 off) Improve Air Quality And System Performance.

Book Now

September 30, 202622 days leftView offer

Duct Services$300 OFF

$300 off qualifying residential duct cleaning service.

Book Now

September 30, 202622 days leftView offer

Why us

Why Choose Us

Licensed and background-checked

Technicians are licensed, insured, and background-checked

Transparent, honest pricing

Clear quotes with no high-pressure upsells

Deep-clean done right

We disassemble and clean components most companies skip

24/7 availability

Emergency help with a 100% satisfaction guarantee

Top-rated locally

4.9 rating from 2,103 reviews

Social proof

What Our Customers Say

5.0
professionalism

“Fix-It replaced our entire duct and HVAC system and everyone was so professional and competent.”

5.0
quality

“They replaced the ductwork in our crawl space and did a great job.”

5.0
quality

“We had our heat pump ductwork replaced and a new water heater installed. The process could not have been more smooth.”

Got questions?

Frequently Asked Questions

Is it worth it to replace ductwork instead of repairing it?

Replacing ductwork is worth it when damage, design flaws, or contamination are widespread enough that spot repairs won’t restore airflow, comfort, or air quality. Most often, replacement becomes the smarter choice when leaks and crushed or deteriorated sections affect many runs, not just a joint or two. If sections crumble when we cut in a new register, the rest is usually past its service life. We handle both repairs and full replacements for homeowners around Summerville, and we can integrate sealing, cleaning, and IAQ upgrades when needed. After an inspection, we’ll advise whether to repair targeted sections, fully replace, or monitor for now, and we provide upfront flat-rate pricing on duct services.

Consider replacement if you notice:

Uneven rooms despite recent repairs or balancing
Persistent dust, odors, or visible interior buildup after cleaning
Kinks, crushed runs, or insulation falling apart across multiple lines
Poor layout or wrong sizes that limit airflow even when sealed well

Schedule a professional duct inspection before deciding so you can compare repair scope against a full replacement plan.

Updated: 2026-03-31

Need help in Summerville, SC? Call (843) 212-7515 or book online.

How much does it cost to replace ductwork in a typical home?

How much does ductwork replacement typically cost for homeowners?

How much does air duct replacement cost for a typical home?

How much does air duct cleaning cost for an average home?

How Can I Seal a Leaking Air Duct to Improve HVAC Efficiency?

Still have questions?

Have questions or need service? Contact our team today to discuss your needs, request a quote, or schedule an appointment.

Call (843) 212-7515

Learn more

Helpful Resources

June 29, 2025

The Ultimate Guide to Efficient Duct and Vent Systems

Estimated Read Time: 3 minutes

Efficient duct and vent systems are crucial for maintaining a comfortable and healthy home environment. At Fix-it 24/7 Air Con...

March 30, 2026

Adams Run HVAC Duct Services: Stop Dripping & Water Damage

Estimated Read Time: 12 minutes

Ductwork dripping is more than an annoyance. In Charleston’s humidity, ductwork sweating can stain ceilings, warp floors, and...

January 5, 2026

Isle of Palms HVAC Duct Services: Replace Ductwork Fast

Estimated Read Time: 11 minutes

If rooms run hot and cold, dust returns fast, or energy bills keep climbing, you may need ductwork replacement. This guide ex...

Where we work

Where We Work

Hanahan

SC

Moncks Corner

SC

Summerville

SC

Wadmalaw Island

SC

Isle Of Palms

SC

Folly Beach

SC

North Charleston

SC

James Island

SC

Charleston

SC

Huger

SC

Hollywood

SC

Goose Creek

SC

Cordesville

SC

Ladson

SC

Ridgeville

SC

Charleston Afb

SC

Awendaw

SC

Sullivans Island

SC

Mount Pleasant

SC

Ravenel

SC

Johns Island

SC

Adams Run

SC

How our prices compare.

What can you expect to pay?

How customers feel about the bill, in their words.

Typical price ranges.

Active coupons & redemption details.

Why Choose Us

Licensed and background-checked

Transparent, honest pricing

Deep-clean done right

24/7 availability

Top-rated locally

What Our Customers Say

5.0professionalism

5.0quality

5.0quality

Frequently Asked Questions

Helpful Resources

The Ultimate Guide to Efficient Duct and Vent Systems

Adams Run HVAC Duct Services: Stop Dripping & Water Damage

Isle of Palms HVAC Duct Services: Replace Ductwork Fast

Where We Work

Hanahan

Moncks Corner

Summerville

Wadmalaw Island

Isle Of Palms

Folly Beach

North Charleston

James Island

Charleston

Huger

Hollywood

Goose Creek

Cordesville

Ladson

Ridgeville

Charleston Afb

Awendaw

Sullivans Island

Mount Pleasant

Ravenel

Johns Island

Adams Run

Schedule service today with Fix-it 24/7 Air Conditioning, Plumbing & Heating, LLC.

5.0
professionalism

5.0
quality

5.0
quality